Home
›
Engine / Hybrid System
›
3UR-FE LUBRICATION
›
OIL AND OIL FILTER
OIL AND OIL FILTER > REPLACEMENT > Preparation
SST
09228-06501
Oil Filter Wrench
EQUIPMENT
Oil pressure gauge
-
Steel square
-
Torque wrench
-
LUBRICANT / Standard Oil Grade
Item
Oil Viscosity (SAE)
API grade SL "energy-conserving", SM "energy-conserving", SN "resource-conserving" or ILSAC multigrade engine oil
5W-30
10W-30
(5W-30 is best choice for fuel economy and good starting in cold weather.)
API grade SL, SM or SN multigrade engine oil
15W-40
20W-50
LUBRICANT / Standard Capacity
Item
Capacity
Drain and refill without oil filter change
7.1 liters (7.5 US qts, 6.2 Imp qts)
Drain and refill with oil filter change
7.5 liters (7.9 US qts, 6.6 Imp. qts)
Dry fill
9.3 liters (9.8 US qts, 8.2 Imp. qts)
RECOMMENDED TOOLS
09010-3C110
Set, Hexagon Socket Wrench
(09013-6C110)
Socket Hexagon
6mm
09082-00040
TOYOTA Electrical Tester
(09083-00150)
Test Lead Set
SSM
Toyota Genuine Seal Packing 1282B, Three Bond 1282B or equivalent
-
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-