OIL PRESSURE SWITCH > REMOVAL > Preparation
|  |
|
EQUIPMENTOil pressure gauge
| -
| Steel square
| -
| Torque wrench
| -
| |
|
LUBRICANT
(2008/11 - 2012/08)
/ for Type A:Item
| Capacity
| Classification
| Drain and refill
| without Oil filter change
| 6.6 liters (7.0 US qts, 5.8 Imp qts)
| ILSAC multigrade engine oil 0W-20 5W-20 (0W-20 is best choice for fuel economy and good starting in cold weather.)
| with Oil filter change
| 7.0 liters (7.4 US qts, 6.2 Imp. qts)
| Dry fill
| 8.4 liters (8.9 US qts, 7.4 Imp. qts)
|
LUBRICANT
(2008/11 - 2012/08)
/ for Type B:Item
| Capacity
| Classification
| Drain and refill
| without Oil filter change
| 7.1 liters (7.4 US qts, 6.2 Imp qts)
| ILSAC multigrade engine oil 0W-20 5W-20 (0W-20 is best choice for fuel economy and good starting in cold weather.)
| with Oil filter change
| 7.5 liters (7.9 US qts, 6.6 Imp. qts)
| Dry fill
| 9.3 liters (9.8 US qts, 8.2 Imp. qts)
| |
|
LUBRICANT
(2012/08 - ) / Standard Oil GradeItem
| Oil Viscosity (SAE)
| API grade SL "energy-conserving", SM "energy-conserving", SN "resource-conserving" or ILSAC multigrade engine oil
| 5W-30 10W-30 (5W-30 is best choice for fuel economy and good starting in cold weather.)
| API grade SL, SM or SN multigrade engine oil
| 15W-40 20W-50
|
LUBRICANT
(2012/08 - ) / Standard CapacityItem
| Capacity
| Drain and refill without oil filter change
| 7.1 liters (7.5 US qts, 6.2 Imp qts)
| Drain and refill with oil filter change
| 7.5 liters (7.9 US qts, 6.6 Imp. qts)
| Dry fill
| 9.3 liters (9.8 US qts, 8.2 Imp. qts)
| |
|
RECOMMENDED TOOLS
| 09010-3C110
| Set, Hexagon Socket Wrench
|
| 
| (09013-6C110)
| Socket Hexagon 6mm
|
| 
| 09082-00040
| TOYOTA Electrical Tester
|
| 
| (09083-00150)
| Test Lead Set
|
| |
|
SSMToyota Genuine Seal Packing 1282B, Three Bond 1282B or equivalent
| -
| Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
| -
| |
|