Home › TRANSMISSION · U151F AUTOMATIC TRANSAXLE › SPEED SENSOR

SPEED SENSOR > INSPECTION

for Preparation Click here



1. INSPECT SPEED SENSOR (NT SENSOR)


    C110343E10
  1. Disconnect the speed sensor connector from the transaxle.

  1. Measure the resistance according to the value(s) in the table below.
    Resistance:
    AISIN made: 
    Tester Connection
    Specified Condition
    20°C (68°F)
    1 - 2
    560 to 680 Ω
    Resistance:
    TOYOTA made: 
    Tester Connection
    Specified Condition
    20°C (68°F)
    1 - 2
    500 to 620 Ω



2. INSPECT SPEED SENSOR (NC SENSOR)


    C110343E10
  1. Disconnect the speed sensor connector from the transaxle.

  1. Measure the resistance according to the value(s) in the table below.
    Resistance:
    AISIN made: 
    Tester Connection
    Specified Condition
    20°C (68°F)
    1 - 2
    560 to 680 Ω
    Resistance:
    TOYOTA made: 
    Tester Connection
    Specified Condition
    20°C (68°F)
    1 - 2
    500 to 620 Ω