FRONT AIRBAG SENSOR > INSTALLATION |
| 1. INSTALL FRONT AIRBAG SENSOR LH |
Check that the ignition switch is off.
Check that the battery negative (-) terminal is disconnected.
![]() |
Install the front airbag sensor LH with the 2 bolts.
Connect the connector to the front airbag sensor LH.
Check that there is no looseness in the installation parts of the front airbag sensor LH.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 3. PERFORM INITIALIZATION |
Perform initialization.
| 4. INSPECT SRS WARNING LIGHT |
Inspect the SRS warning light (Click here).