GARAGE DOOR OPENER SYSTEM > INSPECTION |
| 1. INSPECT GARAGE DOOR OPENER |
![]() |
Press the switch and check that each red LED turns on. If one or more of the switches does not turn on the LED, confirm normal operation of the fuse and wire harness, then replace the garage door opener.
| 2. INSPECT GARAGE DOOR OPENER REGISTRATION AND TRANSMITTING |
![]() |
Check that the code of hand-held transmitter for inspection can be registered.
![]() |
Press the switch which inspection code has been registered for and check that LED (green) of the home link tester lights up.
When the inspection is complete, reregister the customer's transmitter code(s) again.