Home › SUSPENSION & AXLE › TIRE AND WHEEL › TIRE PRESSURE WARNING VALVE AND TRANSMITTER

TIRE PRESSURE WARNING VALVE AND TRANSMITTER > DISPOSAL

for Preparation Click here


HINT:
The tire pressure warning valve and transmitter is powered by a lithium battery. When disposing of the tire pressure warning valve and transmitter, remove the battery and dispose of it correctly.



1. DISPOSE OF TIRE PRESSURE WARNING VALVE AND TRANSMITTER


    C156694
  1. Use the tip of a screwdriver to pry off the back cover.



    C156695E01
  1. The battery and base board covered with resin are exposed. While taking out the battery, cut the 2 terminals that connect the battery to the base board.