Home › BODY › MIRROR › POWER MIRROR CONTROL SYSTEM (w/ Memory)

POWER MIRROR CONTROL SYSTEM (w/ Memory) > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK POWER MIRROR SWITCH OPERATION
  1. Remote control
    The mirror adjust switch can control the adjustment axis of the mirror surface.

  1. Reverse-linked
    This function tilts the mirror surface downward to improve the visibility when driving in reverse, provided that all the conditions given below have been met.

    1. Ignition switch to the on position.
    2. Shift lever is moved to "R".



2. CHECK MEMORY SWITCH OPERATION
  1. Memory
    Memorizes the positions when all conditions below have been met and the 1 or 2 button is pushed while the "SET" button is pushed.

    1. Ignition switch to the on position.
    2. Shift position is P.
    When the memory setting is completed, the buzzer will sound for 0.5 seconds.

  1. Recall
    If the button 1 or 2 is pressed when all conditions have been met, it recalls the positions.

    1. Ignition switch to the on position.
    2. Shift position is P.
    If the button 1 or 2 is pressed when all conditions have been met and within 30 seconds, it recalls the positions.
    1. Ignition switch to the on position.
    2. Driver door is opened.