IGNITION SWITCH > INSTALLATION |
| 1. INSTALL IGNITION SWITCH ASSEMBLY |
![]() |
Install the ignition switch with the 2 screws.
Install the ignition switch connector.
| 2. INSTALL STEERING COLUMN COVER LOWER |
Attach the 4 claws to install the steering column cover lower.
![]() |
Insert the key into the ignition key cylinder and release the steering lock.
Turn the steering wheel counterclockwise and install the screw.
![]() |
Turn the steering wheel clockwise and install the screw.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |