IGNITION SWITCH > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE STEERING COLUMN COVER LOWER |
![]() |
Insert the key into the ignition key cylinder and release the steering lock.
Turn the steering wheel clockwise to gain access to the screw and remove the screw.
![]() |
Turn the steering wheel counterclockwise to gain access to the screw and remove the screw.
Detach the 4 claws, and remove the steering column cover lower.
| 3. REMOVE IGNITION SWITCH ASSEMBLY |
![]() |
Disconnect the ignition switch connector.
Remove the 2 screws and ignition switch.