Home › TRANSMISSION ยท U151E AUTOMATIC TRANSAXLE › OIL PUMP

OIL PUMP > DISASSEMBLY

for Preparation Click here



1. INSPECT OIL PUMP ASSEMBLY

HINT:



2. REMOVE CLUTCH DRUM OIL SEAL RING


    D003650E01
  1. Remove the 2 clutch drum oil seal rings.



3. REMOVE STATOR SHAFT ASSEMBLY


    D003651E01
  1. Using a "TORX" socket (T30), remove the 11 bolts and stator shaft.



4. INSPECT CLEARANCE OF OIL PUMP ASSEMBLY

HINT:



5. REMOVE FRONT OIL PUMP DRIVE GEAR


    D009206E02
  1. Remove the front oil pump drive gear.



6. REMOVE FRONT OIL PUMP DRIVEN GEAR


    C119012
  1. Remove the front oil pump driven gear.



7. REMOVE FRONT OIL PUMP BODY O-RING


    D025586E01
  1. Using a screwdriver, remove the O-ring.

    HINT:
    Tape the screwdriver before use.



8. REMOVE FRONT OIL PUMP OIL SEAL


    D003647E01
  1. Mount the oil pump in a soft jaw vise.

  1. Using SST, remove the oil seal from the oil pump body.

    SST
    09308-00010