Home › TRANSMISSION ยท U151E AUTOMATIC TRANSAXLE › UNDERDRIVE PLANETARY GEAR

UNDERDRIVE PLANETARY GEAR > INSPECTION

for Preparation Click here



1. INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD


    D025593E01
  1. Using SST, fix the underdrive planetary gear assembly.

    SST
    09387-00050  



    D025594E01
  1. Using SST and a torque wrench, measure the turning torque of the underdrive planetary gear assembly while rotating the torque wrench at 60 rpm.

    SST
    09387-00050  

    Turning torque at 60 rpm.:
    0.50 to 1.42 N*m (5.1 to 14.5 kgf*cm, 4.4 to 12.6 in.*lbf)

    HINT:
    Use a torque wrench with a fulcrum length of 160 mm (6.3 in.).