UNDERDRIVE PLANETARY GEAR > DISASSEMBLY |
| 1. INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD |
| 2. REMOVE FRONT PLANETARY GEAR NUT |
![]() |
Using SST, loosen the staked part of the lock nut.
![]() |
Place the underdrive planetary gear in a soft jaw vise.
![]() |
Using a socket wrench, remove the lock nut.
| 3. REMOVE CYLINDRICAL ROLLER BEARING RACE INNER |
![]() |
Using SST, remove the cylindrical roller bearing race inner.
| 4. REMOVE UNDERDRIVE PLANETARY GEAR ASSEMBLY |
![]() |
Using SST and a press, remove the differential drive pinion, parking lock gear, counter driven gear with underdrive planetary ring gear and radial ball bearing front.
![]() |
Place the underdrive planetary gear in a soft jaw vise.
Using SST, remove the radial ball bearing rear from the underdrive planetary gear.
| 5. REMOVE UNDERDRIVE PLANETARY RING GEAR |
![]() |
Using a snap ring pliers, remove the snap ring.
![]() |
Remove the underdrive planetary ring gear from the counter driven gear.