Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › DYNAMIC LASER CRUISE CONTROL SYSTEM

DTC    P1630    Communication Error from VSC to ECM

DTC    U0122    Lost Communication with Vehicle Dynamics Control Module

for Preparation Click here


DESCRIPTION

The skid control ECU sends signals such as cruise control cancel demand signals and brake operation demand (from ECM) response signals to the ECM when the dynamic laser cruise control system is in operation.

DTC No.
DTC Detection Condition
Trouble Area
P1630
While the dynamic laser cruise control is either preparing for operation or operating, if communication data from the skid control ECU is logically inconsistent for a certain amount of time, the ECM records this logical error code
  1. Communication circuit
  2. ABS & traction actuator (Skid control ECU)
  3. ECM
U0122
While dynamic laser cruise control is either preparing for operation or operating, if communication data from the skid control ECU is invalid for a certain amount of time, the ECM records this communication cut off code
  1. Communication circuit
  2. ABS & traction actuator (Skid control ECU)
  3. ECM

INSPECTION PROCEDURE

HINT:
This circuit uses CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more DTCs in the CAN communication system are output.

1.CHECK CAN COMMUNICATION SYSTEM
Refer to HOW TO PROCEED WITH TROUBLESHOOTING (Click here).

NEXT

END