DTC P1631 Communication Error from ECM to VSC |
DTC U0100 Lost Communication with ECM / PCM "A" |
| DTC No. | DTC Detection Condition | Trouble Area |
| P1631 | While the dynamic laser cruise control is either preparing for operation or operating, if the ECM continuously receives a logical error signal from the skid control ECU for a certain amount of time, the ECM records this logical error code |
|
| U0100 | While the dynamic laser cruise control is either preparing for operation or operating, if the ECM continuously receives a communication cut off signal from the ABS & traction actuator (skid control ECU) for a certain amount of time, the ECM records this communication cut off code |
|
| 1.CHECK CAN COMMUNICATION SYSTEM |
| NEXT | ||
| ||