Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › DYNAMIC LASER CRUISE CONTROL SYSTEM

DTC    U0123    Communication Error of Yaw Rate Sensor

for Preparation Click here


DESCRIPTION

This circuit detects the yaw rate of the vehicle and transmits its signal to the skid control ECU and distance control ECU.

DTC No.
DTC Detection Condition
Trouble Area
U0123
While the dynamic laser cruise control is either preparing for operation or operating, the ECM continuously receives a yaw rate sensor malfunction signal for a certain amount of time
  1. Communication circuit
  2. Yaw rate sensor
  3. Distance control ECU
  4. ECM

INSPECTION PROCEDURE

HINT:
This circuit uses CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more DTCs in the CAN communication system are output.

1.CHECK CAN COMMUNICATION SYSTEM
Refer to HOW TO PROCEED WITH TROUBLESHOOTING (Click here).

NEXT

END