OCCUPANT CLASSIFICATION SYSTEM > TERMINALS OF ECU |
| OCCUPANT CLASSIFICATION ECU |

| Symbols (Terminal No.) | Wiring Color | Terminal Description | Condition | Specification |
| +B (O3-1) - GND (O3-3) | W-L - W-B | Power source (ECU-B Fuse) | Always | 10 to 14 V |
| DIA (O3-2) - GND (O3-3) | W - W-B | Diagnosis (DLC3) | IG switch ON | Pulse generation |
| GND (O3-3) - Body ground | W-B - Body ground | Ground | Always | Below 1 V |
| FSR- (O3-4) - GND (O3-3) | G-B - W-B | Center airbag sensor assembly communication line (-) | Always | Below 1 V |
| BGND (O3-5) - GND (O3-3) | L - W-B | Passenger side buckle switch ground line | Always | Below 1 V |
| IG (O3-7) - GND (O3-3) | B-O - W-B | Power source (IG2 Fuse) | IG switch ON | 10 to 14 V |
| FSR+ (O3-8) - FSR- (O3-4) | G-R - G-B | Center airbag sensor assembly communication line | IG switch ON | Pulse generation |
| BSW (O3-9) - BGND (O3-5) | R - L | Passenger side buckle switch line | Buckle switch ON Buckle switch OFF | Pulse generation |
| SGD1 (O4-1) - GND (O3-3) | O - W-B | Occupant classification sensor front LH ground line | Always | Below 1 V |
| SGD2 (O4-2) - GND (O3-3) | B-Y - W-B | Occupant classification sensor front RH ground line | Always | Below 1 V |
| SGD3 (O4-3) - GND (O3-3) | R-B - W-B | Occupant classification sensor rear LH ground line | Always | Below 1 V |
| SGD4 (O4-4) - GND (O3-3) | R-W - W-B | Occupant classification sensor rear RH ground line | Always | Below 1 V |
| SVC3 (O4-5) - SGD3 (O4-3) | Y-B - R-B | Occupant classification sensor rear LH power supply line | IG switch ON, a load is applied to occupant classification sensor rear LH | 4.5 to 5.1 V |
| SVC4 (O4-6) - SGD4 (O4-4) | Y - R-W | Occupant classification sensor rear RH power supply line | IG switch ON, a load is applied to occupant classification sensor rear RH | 4.5 to 5.1 V |
| SIG1 (O4-7) - SGD1 (O4-1) | G - O | Occupant classification sensor front LH signal line | IG switch ON, a load is applied to occupant classification sensor front LH | 0.2 to 4.7 V |
| SIG2 (O4-8) - SGD2 (O4-2) | LG - B-Y | Occupant classification sensor front RH signal line | IG switch ON, a load is applied to occupant classification sensor front RH | 0.2 to 4.7 V |
| SIG3 (O4-9) - SGD3 (O4-3) | G-B - R-B | Occupant classification sensor rear LH signal line | IG switch ON, a load is applied to occupant classification sensor rear LH | 0.2 to 4.7 V |
| SIG4 (O4-10) - SGD4 (O4-4) | L-W - R-W | Occupant classification sensor rear RH signal line | IG switch ON, a load is applied to occupant classification sensor rear RH | 0.2 to 4.7 V |
| SVC1 (O4-11) - SGD1 (O4-1) | V - O | Occupant classification sensor front LH power supply line | IG switch ON, a load is applied to occupant classification sensor front LH | 4.5 to 5.1 V |
| SVC2 (O4-12) - SGD2 (O4-2) | P - B-Y | Occupant classification sensor front RH power supply line | IG switch ON, a load is applied to occupant classification sensor front RH | 4.5 to 5.1 V |