Home › BODY ELECTRICAL › METER › COMBINATION METER

COMBINATION METER > INSTALLATION

for Preparation Click here



1. INSTALL COMBINATION METER ASSEMBLY
  1. Connect the connectors.



    A116616
  1. Install the combination meter assembly with the 4 screws.



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    A116615
  1. Install the instrument cluster finish panel sub-assembly with the 4 clips.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION
  1. Perform initialization.

    NOTICE:
    Some systems need initialization when disconnecting the cable from the negative battery terminal.