Home › BODY ELECTRICAL › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM

WIRELESS DOOR LOCK CONTROL SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK/CLEAR (USING TECHSTREAM:)
  1. DTC check

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to the ON position.

    3. Read the DTCs on the tester screen.

  2. DTC clear

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to the ON position.

    3. Clear the DTCs following the prompts on the tester screen.

      HINT:
      Refer to the Techstream operator's manual for further details.