Home › BODY › SEAT › FRONT SEAT FRAME WITH ADJUSTER

FRONT SEAT FRAME WITH ADJUSTER > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT ADJUSTER SUB-ASSEMBLY LH


    B081621E06
  1. Check operation of the seat frame (slide motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 1
      Battery negative (-) → 2
      Clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      Counter clockwise

      If the result is not as specified, replace the seat frame with adjuster.



    B081621E06
  1. Check operation of the seat frame (front vertical motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 1
      Battery negative (-) → 2
      Clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      Counter clockwise

      If the result is not as specified, replace the seat frame with adjuster.



    B081621E06
  1. Check operation of the seat frame (lifter motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2
      Battery negative (-) → 1
      Counter clockwise
      Battery positive (+) → 1
      Battery negative (-) → 2
      Clockwise

      If the result is not as specified, replace the seat frame with adjuster.



    B081621E06
  1. Check operation of the seat frame (reclining motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2
      Battery negative (-) → 1
      Counter clockwise
      Battery positive (+) → 1
      Battery negative (-) → 2
      Clockwise

      If the result is not as specified, replace the seat frame with adjuster.



2. INSPECT FRONT SEAT ADJUSTER SUB-ASSEMBLY RH


    B081621E06
  1. Check operation of the seat frame (slide motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2
      Battery negative (-) → 1
      Counter clockwise
      Battery positive (+) → 1
      Battery negative (-) → 2
      Clockwise

      If the result is not as specified, replace the seat frame with adjuster.



    B081621E06
  1. Check operation of the seat frame (reclining motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2
      Battery negative (-) → 1
      Counter clockwise
      Battery positive (+) → 1
      Battery negative (-) → 2
      Clockwise

      If the result is not as specified, replace the seat frame with adjuster.