Home › BODY › SEAT › FRONT POWER SEAT LUMBAR SWITCH

FRONT POWER SEAT LUMBAR SWITCH > INSPECTION

for Preparation Click here



1. INSPECT FRONT POWER SEAT LUMBAR SWITCH


    B068208E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Position
    Specified Condition
    1(R) - 2(E2)
    HOLD
    Below 1 Ω
    3(B) - 4(H)
    HOLD
    Below 1 Ω
    1(R) - 2(E2)
    OFF
    Below 1 Ω
    4(H) - 5(E1)
    OFF
    Below 1 Ω
    1(R) - 3(B)
    RELEASE
    Below 1 Ω
    4(H) - 5(E1)
    RELEASE
    Below 1 Ω

    If the result is not as specified, replace the switch.