Home › BODY › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY

LUMBAR SUPPORT ADJUSTER ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY


    B129638E01
  1. Check operation of the lumbar support adjuster motor.

    1. Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminal.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 1
      Battery negative (-) → 2
      Clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      Counterclockwise

      If the result is not as specified, replace the lumbar support adjuster assembly.