Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM

ENGINE IMMOBILISER SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect Techstream to the DLC3.

  2. Turn the ignition switch on.

  3. Turn the tester on.

  4. Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.

  5. Check the details of the DTC(s) (Click here).


CLEAR THE DTC
  1. Connect Techstream to the DLC3.

  2. Turn the ignition switch on.

  3. Turn the tester on.

  4. Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.

  5. Erase the DTCs.