Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › INTUITIVE PARKING ASSIST SYSTEM

INTUITIVE PARKING ASSIST SYSTEM > TERMINALS OF ECU

for Preparation Click here



CLEARANCE WARNING ECU
*1: with Front Clearance Sonar

E124030E01


Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specification
RL (C9-3) - E (C9-7)
R-B - W-B
Reverse signal
Ignition switch ON, shift lever in other than R position
Below 1 V
RL (C9-3) - E (C9-7)
R-B - W-B
Reverse signal
Ignition switch ON, shift lever in R position
10 to 14 V
CBZ (C9-4) - E (C9-7) (*1)
Y-R - W-B
Clearance warning buzzer
Clearance sonar sounding (when the front clearance sonar senses something)
Pulse generation
Refer to waveform 1
L5 (C9-5) - E (C9-7)
L-B - W-B
Back sonar indicator
Back sonar indicator OFF
10 to 14 V
L5 (C9-5) - E (C9-7)
L-B - W-B
Back sonar indicator
Back sonar indicator ON
Below 3 V
L3 (C9-6) - E (C9-7)
O - W-B
Rear clearance sonar indicator LH
Rear clearance sonar indicator LH OFF
10 to 14 V
L3 (C9-6) - E (C9-7)
O - W-B
Rear clearance sonar indicator LH
Rear clearance sonar indicator LH ON
Below 3 V
E (C9-7) - Body ground
W-B - Body ground
Ground
Always
Below 1 V
SPD (C9-8) - E (C9-7)
V-W - W-B
Speed signal
Ignition switch ON, drive wheels are turned slowly
Pulse generation
E1 (C9-9) - E (C9-7) (*1)
P-L - W-B
Front clearance sonar sensor ground
Always
Below 1 V
S5 (C9-10) - E (C9-7)
G-O - W-B
Back sonar sensor RH signal
When signals are transmitted from the ECU to the back sonar sensor RH
Pulse generation
Refer to waveform 2
S3 (C9-11) - E (C9-7)
G-B - W-B
Rear clearance sonar sensor LH signal
When signals are transmitted from the ECU to the rear clearance sonar sensor LH
Pulse generation
Refer to waveform 3
S1 (C9-12) - E (C9-7)
G-W - W-B
Rear clearance sonar sensor RH signal
When signals are transmitted from the ECU to the rear clearance sonar sensor RH
Pulse generation
Refer to waveform 3
+B (C9-13) - E (C9-7)
LG-B - W-B
Power source
Ignition switch ON, clearance sonar main switch OFF
Below 1 V
+B (C9-13) - E (C9-7)
LG-B - W-B
Power source
Ignition switch ON, clearance sonar main switch ON
10 to 14 V
PL (C9-15) - E (C9-7)
L-Y - W-B
Parking position signal
Shift lever in P position
10 to 14 V
BBZ (C9-16)- E (C9-7)
R - W-B
Clearance warning buzzer
Clearance sonar sounding (when the back sonar or rear clearance sonar senses something)
Pulse generation
Refer to waveform 1
L6 (C9-17) - E (C9-7)
BR-W - W-B
Power indicator
Ignition switch ON, clearance sonar main switch OFF
10 to 14 V
L6 (C9-17) - E (C9-7)
BR-W - W-B
Power indicator
Ignition switch ON, clearance sonar main switch ON
Below 3 V
L4 (C9-18) - E (C9-7) (*1)
P - W-B
Front clearance sonar indicator LH
Front clearance sonar indicator LH OFF
10 to 14 V
L4 (C9-18) - E (C9-7) (*1)
P - W-B
Front clearance sonar indicator LH
Front clearance sonar indicator LH ON
Below 3 V
L2 (C9-19) - E (C9-7) (*1)
V-R - W-B
Front clearance sonar indicator RH
Front clearance sonar indicator RH OFF
10 to 14 V
L2 (C9-19) - E (C9-7) (*1)
V-R - W-B
Front clearance sonar indicator RH
Front clearance sonar indicator RH ON
Below 3 V
L1 (C9-20) - E (C9-7)
R-L - W-B
Rear clearance sonar indicator RH
Rear clearance sonar indicator RH OFF
10 to 14 V
L1 (C9-20) - E (C9-7)
R-L - W-B
Rear clearance sonar indicator RH
Rear clearance sonar indicator RH ON
Below 3 V
E2 (C9-21) - E (C9-7)
LG - W-B
Rear clearance sonar and back sonar sensor ground
Always
Below 1 V
S6 (C9-22) - E (C9-7)
G-Y - W-B
Back sonar sensor LH signal
When signals are transmitted from the ECU to the back sonar sensor LH
Pulse generation
Refer to waveform 2
S4 (C9-23) - E (C9-7) (*1)
V - W-B
Front clearance sonar sensor LH signal
When signals are transmitted from the ECU to the front clearance sonar sensor LH
Pulse generation
Refer to waveform 3
S2 (C9-24) - E (C9-7) (*1)
L - W-B
Front clearance sonar sensor RH signal
When signals are transmitted from the ECU to the front clearance sonar sensor RH
Pulse generation
Refer to waveform 3

AIR CONDITIONER AMPLIFIER ASSEMBLY
*1: with Front Clearance Sonar
*2: Manual A/C
*3: Auto A/C

E145202E01


Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specification
BK (A10-4) - Body ground (*2)
L-B - Body ground
Back sonar indicator
Back sonar indicator OFF
10 to 14 V
BK (A10-4) - Body ground (*2)
L-B - Body ground
Back sonar indicator
Back sonar indicator ON
Below 3 V
OP (A10-5) - Body ground (*2)
BR-W - Body ground
Power indicator
Ignition switch ON, clearance sonar main switch OFF
10 to 14 V
OP (A10-5) - Body ground (*2)
BR-W - Body ground
Power indicator
Ignition switch ON, clearance sonar main switch ON
Below 3 V
Z- (A10-15) - Body ground (*2)
R - Body ground
Clearance warning buzzer
Clearance sonar sounding (when the back sonar or rear clearance sonar senses something)
Pulse generation
Refer to waveform 1
SK (A10-13) - Body ground (*2)
LG-B - Body ground
Power source
Ignition switch ON, clearance sonar main switch OFF
Below 1 V
SK (A10-13) - Body ground (*2)
LG-B - Body ground
Power source
Ignition switch ON, clearance sonar main switch ON
10 to 14 V
FR (A10-16) - Body ground (*1) (*2)
V-R - Body ground
Front clearance sonar indicator RH
Front clearance sonar indicator RH OFF
10 to 14 V
FR (A10-16) - Body ground (*1) (*2)
V-R - Body ground
Front clearance sonar indicator RH
Front clearance sonar indicator RH ON
Below 3 V
FL (A10-17) - Body ground (*1) (*2)
P - Body ground
Front clearance sonar indicator LH
Front clearance sonar indicator LH OFF
10 to 14 V
FL (A10-17) - Body ground (*1) (*2)
P - Body ground
Front clearance sonar indicator LH
Front clearance sonar indicator LH ON
Below 3 V
RR (A10-3) - Body ground (*2)
R-L - Body ground
Rear clearance sonar indicator RH
Rear clearance sonar indicator RH OFF
10 to 14 V
RR (A10-3) - Body ground (*2)
R-L - Body ground
Rear clearance sonar indicator RH
Rear clearance sonar indicator RH ON
Below 3 V
RL (A10-18) - Body ground (*2)
O - Body ground
Rear clearance sonar indicator LH
Rear clearance sonar indicator LH OFF
10 to 14 V
RL (A10-18) - Body ground (*2)
O - Body ground
Rear clearance sonar indicator LH
Rear clearance sonar indicator LH ON
Below 3 V
BK (A11-8) - Body ground (*3)
L-B - Body ground
Back sonar indicator
Back sonar indicator OFF
10 to 14 V
BK (A11-8) - Body ground (*3)
L-B - Body ground
Back sonar indicator
Back sonar indicator ON
Below 3 V
OP (A11-5) - Body ground (*3)
BR-W - Body ground
Power indicator
Ignition switch ON, clearance sonar main switch OFF
10 to 14 V
OP (A11-5) - Body ground (*3)
BR-W - Body ground
Power indicator
Ignition switch ON, clearance sonar main switch On
Below 3 V
Z- (A11-12) - Body ground (*3)
R - Body ground
Clearance warning buzzer
Clearance sonar sounding (when the back sonar or rear clearance sonar senses something)
Pulse generation
Refer to waveform 1
SK (A11-1) - Body ground (*3)
LG-B - Body ground
Power source
Ignition switch ON, clearance sonar main switch OFF
Below 1 V
SK (A11-1) - Body ground (*3)
LG-B - Body ground
Power source
Ignition switch ON, clearance sonar main switch ON
10 to 14 V
FR (A11-3) - Body ground (*1) (*3)
V-R - Body ground
Front clearance sonar indicator RH
Front clearance sonar indicator RH OFF
10 to 14 V
FR (A11-3) - Body ground (*1) (*3)
V-R - Body ground
Front clearance sonar indicator RH
Front clearance sonar indicator RH ON
Below 3 V
FL (A11-4) - Body ground (*1) (*3)
P - Body ground
Front clearance sonar indicator LH
Front clearance sonar indicator LH OFF
10 to 14 V
FL (A11-4) - Body ground (*1) (*3)
P - Body ground
Front clearance sonar indicator LH
Front clearance sonar indicator LH ON
Below 3 V
RR (A11-9) - Body ground (*3)
R-L - Body ground
Rear clearance sonar indicator RH
Rear clearance sonar indicator RH OFF
10 to 14 V
RR (A11-9) - Body ground (*3)
R-L - Body ground
Rear clearance sonar indicator RH
Rear clearance sonar indicator RH ON
Below 3 V
RL (A11-10) - Body ground (*3)
O - Body ground
Rear clearance sonar indicator LH
Rear clearance sonar indicator LH OFF
10 to 14 V
RL (A11-10) - Body ground (*3)
O - Body ground
Rear clearance sonar indicator LH
Rear clearance sonar indicator LH ON
Below 3 V


    I041864E01
  1. Reference: waveform 1

    HINT:
    1. Terminal: CBZ - E, BBZ - E, Z- - Body ground
    2. Gauge set: 2 V/DIV., 500 μs/DIV.
    3. Condition: When the clearance sonar is detecting an object.



  2. I041866E01
  3. Reference: waveform 2

    HINT:
    1. Terminal: S5 - E, S6 - E
    2. Gauge set: 2 V/DIV., 100 μs/DIV.
    3. Condition: When the back sonar is not detecting an object.



  4. I041867E01
  5. Reference: waveform 3

    HINT:
    1. Terminal: S3 - E, S1 - E, S4 - E, S2 - E
    2. Gauge set: 2 V/DIV., 100 μs/DIV.
    3. Condition: When the clearance sonar is not detecting an object.