METER / GAUGE SYSTEM > CUSTOMIZE PARAMETERS |
| Seat Belt Buzzer ON/OFF Setting |
Driver side and passenger side seat belt buzzers
Turn the ignition switch to the ON position.
Press the ODO/TRIP switch until the odometer appears.
Turn the ignition switch off.
Turn the ignition switch to the ON position.
Press the ODO/TRIP switch immediately (within 6 seconds) and hold it down for 10 seconds or more.
Continue holding down the ODO/TRIP switch and fasten the driver side seat belt.
Check that the odometer displays either "b-ON" or "b-OFF"
Press the ODO/TRIP switch to change the display to "b-OFF".
Turn the ignition switch off.
Turn the ignition switch to the ON position.
Check that no buzzer sounds when the vehicle speed is 20 km/h (12 mph) or more and the driver seat belt is unfastened.
Front passenger side seat belt buzzer
Turn the ignition switch to the ON position.
Press the ODO/TRIP switch until the odometer appears.
Turn the ignition switch off.
Turn the ignition switch to the ON position.
Sit in the front passenger seat. Press the ODO/TRIP switch immediately (within 6 seconds) and hold it down for 10 seconds or more.
Continue holding down the ODO/TRIP switch and fasten the passenger side seat belt.
Check that the odometer displays either "b-ON" or "b-OFF"
Press the ODO/TRIP switch to change the display to "b-OFF".
Turn the ignition switch off.
Turn the ignition switch to the ON position.
Check that no buzzer sounds when the vehicle speed is 20 km/h (12 mph) or more and the front passenger seat belt is unfastened.