CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > ON-VEHICLE INSPECTION |
| 1. INSPECT CAMSHAFT TIMING CONTROL VALVE ASSEMBLY |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Start the engine and warm it up.
Enter the following menus: Powertrain / Engine and ECT / Active Test.
Check the engine speed when the OCV (camshaft timing oil control valve) is operated by the Techstream.
| Condition | Specified Condition |
| VVT system is OFF (OCV is OFF) | Normal engine speed |
| VVT system is ON (OCV is ON) | Rough idle or engine stalled |