Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL SWITCH

DOOR CONTROL SWITCH > INSPECTION

for Preparation Click here



1. INSPECT DOOR CONTROL SWITCH ASSEMBLY


    B067755E03
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 6
    Lock
    Below 1 Ω
    3 - 5
    3 - 6
    OFF (Free)
    10 kΩ or higher
    3 - 5
    Unlock
    Below 1 Ω

    HINT:
    If the result is not as specified, replace the switch.