REAR SEAT ENTERTAINMENT SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING |
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS |
Interview the customer and confirm the trouble.
Confirm the problem by duplicating the conditions described by the customer.
| |||||
| 3.BASIC INSPECTION |
Basic inspection.
Measure the battery voltage.
with Navigation system:
Check the power supply to the navigation receiver assembly.
Turn the ignition switch to the ACC position.
Check whether the display appears on the navigation receiver assembly.
without Navigation system:
Check the power supply to the radio receiver.
Turn the ignition switch to the ACC position.
Check whether the display appears on the radio receiver.
|
| ||||
|
|
| 4.PROBLEM SYMPTOMS TABLE |
Refer to the problem symptoms table (Click here).
| |||||
| 5.CIRCUIT INSPECTION AND PART INSPECTION |
| |||||
| 6.IDENTIFICATION OF PROBLEM |
| |||||
| 7.REPAIR OR REPLACE |
| |||||
| 8.CONFIRMATION TEST |
|
| ||||
|---|---|---|---|---|---|