DIFFERENTIAL CASE > DISASSEMBLY |
| 1. REMOVE FRONT DIFFERENTIAL RING GEAR |
![]() |
Place the match-marks on the ring gear and differential case.
![]() |
Remove the 16 bolts.
![]() |
Using a plastic hammer, tap ring gear to remove it from the case.
| 2. REMOVE FRONT DIFFERENTIAL SIDE GEAR |
![]() |
Remove the differential LH case from the differential case assembly.
![]() |
Remove the differential case No.2 from the differential case LH.
![]() |
Remove the front differential side gear, front differential side gear thrust washer, conical spring and center differential side gear thrust washer No.2 from the differential case LH.
![]() |
Using a snap ring expander, remove the pinion shaft spacer snap ring.
![]() |
Using a pin punch and hammer, remove 3 straight pins.
![]() |
Remove the center differential pinion shaft and 2 differential pinion shafts.
![]() |
Remove 4 front differential pinions, 4 front differential pinion thrust washers, front differential pinion shaft holder, front differential planetary ring and differential side gear thrust washer No.1.
| 3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING |
![]() |
Using SST, remove the front differential case rear tapered roller bearing from the differential case.
![]() |
Using SST, remove the front differential case rear tapered roller bearing outer race and differential case washer.
| 4. REMOVE CENTER DIFFERENTIAL PINION |
![]() |
Using "TORX" socket (T50), remove the 15 bolts.
![]() |
Place the matchmarks on the differential intermediate case and differential case.
Remove the differential intermediate case from the differential case RH.
![]() |
Remove the center differential side gear, conical spring washer and center differential side gear thrust washer No.1 RH from the differential case RH.
![]() |
Remove the differential spider, 5 center differential pinions and 5 center differential pinion thrust washers from the differential intermediate case.
| 5. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING |
![]() |
Using SST, remove the front differential case front tapered roller bearing from the differential case.
![]() |
Using SST, remove the front differential case front tapered roller bearing outer race and differential case washer.
| 6. REMOVE TRANSAXLE HOUSING OIL SEAL |
![]() |
Using SST, remove the oil seal.
| 7. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL |
![]() |
Using SST, remove the oil seal.