BODY > GENERAL MAINTENANCE |
| 1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY |
Tighten all the parts of the chassis when necessary.
Tighten all the parts of the body when necessary.
| 2. REPLACE AIR CONDITIONING FILTER |
Remove the glove compartment assembly.
Remove the filter case by holding both sides.
Remove the filter from the filter case.
Replace the filter with a new one.
The installation is in the reverse order of the removal.
| 3. ROAD TEST |
Check the engine and chassis for abnormal noises.
Check that the vehicle does not wander or pull to one side.
Check that the brakes work properly and do not drag.
Do setting of the parking brake shoes and drum.
| 4. BODY INSPECTION |
Check the body exterior for dents, scratches and rust.
Check the underbody for rust and damage. If necessary, replace or repair.
| 5. FINAL INSPECTION |
Check the operation of the body parts:
Hood:
Front and rear doors:
Back door
Seats
Be sure to deliver a clean car. Especially check.