Home › ENGINE › 2GR-FE ENGINE CONTROL SYSTEM › ECM

ECM > REMOVAL

for Preparation Click here



1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


    B066073E01
  1. Push the right side wall and then push the left wall to release the stoppers.



    B066074
  1. Pull the glove compartment door sub-assembly rearward to remove it.



2. REMOVE NO. 2 INSTRUMENT PANEL BOX


    B066075E01
  1. Disengage the 2 claws and 4 clips, and remove the No. 2 instrument panel box.



3. REMOVE ECM


    A162672
  1. Disconnect the 5 ECM connectors.

  1. Remove the 2 nuts and ECM.



4. REMOVE ECM (with 10 speakers system)


    A162199
  1. Disconnect the 5 ECM connectors and 2 stereo components amplifier connectors.

  1. Remove the 4 nuts and the ECM with the stereo components amplifier.