Home › TRANSMISSION ยท U151E AUTOMATIC TRANSAXLE › SECOND BRAKE PISTON

SECOND BRAKE PISTON > DISASSEMBLY

for Preparation Click here



1. REMOVE 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY


    D026703E01
  1. Place SST on the return spring and compress the return spring with a press.

    SST
    09387-00060  

  1. Using a screwdriver, remove the snap ring.



    D026704E02
  1. Remove the 2nd brake piston return spring.



2. REMOVE 2ND BRAKE PISTON


    D026705
  1. Hold the 2nd brake piston and apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the 2nd brake cylinder to remove the 2nd brake piston.

    NOTICE:
    Hold the piston with a shop rag or a piece of cloth when removing the piston. Failure to do so may result in the piston jumping out from the cylinder.



3. REMOVE 2ND BRAKE PISTON O-RING


    D026706E01
  1. Remove the 2 O-rings from the 2nd brake piston.