Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM

DTC    C1201/51    Engine Control System Malfunction

for Preparation Click here


DESCRIPTION

If trouble occurs the engine control system, the ECM transmits the abnormality to the skid control ECU. The skid control ECU set this DTC and the skid control ECU prohibits TRAC and VSC control.

DTC Code
DTC Detection Condition
Trouble Area
C1201/51
Engine control system malfunction signal continues for 5 sec. or more.
Engine control system

INSPECTION PROCEDURE

1.CHECK ENGINE CONTROL SYSTEM
  1. Check if the normal system code is recorded for engine control system.


Result:

Result
Proceed to
DTC is not output
A
DTC is output
B



B
INSPECT ENGINE CONTROL SYSTEM
A

REPLACE ECM