Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM

VEHICLE STABILITY CONTROL SYSTEM > FREEZE FRAME DATA

for Preparation Click here



FREEZE FRAME DATA
  1. The vehicle (sensor) status, stored during ABS and/or VSC operation or at the time of an error code detection, can be displayed by Techstream.

  2. Only one record of freeze frame data is stored and the freeze frame data generated during ABS and/or VSC operation are updated whenever the vehicle status is changed. Also, the number of the ignition switch is ON after the freeze frame data is stored can be stored up to 31 and it can be displayed. After storing the DTC, the freeze frame data is not up-dated.

    HINT:
    If the ignition switch "ON" operation exceeds 31 times, "31"appears on the display.

  3. If a malfunction occurs, the freeze frame data is stored but the ABS actuation data is deleted.

    ABS / VSC / TRAC: 
    Tester Display
    Measurement Item
    Reference Value
    Elapsed Time after Freeze Trigger
    Elapsed time after freeze trigger
    Min.: 0 ms, Max.: 500 ms
    Number of IG ON
    Number of operations of ignition switch ON after memorizing freeze frame data
    0 to 31
    Buzzer
    Skid control buzzer signal
    Skid control buzzer ON: ON, OFF: OFF
    Stop Light SW
    Stop light switch signal
    Stop light switch ON: ON, OFF: OFF
    Parking Brake SW
    Parking brake switch signal
    Parking brake switch ON: ON, OFF: OFF
    TRC (TRAC)/VSC OFF SW*
    Traction OFF switch signal
    TRAC OFF SW ON: ON
    OFF: OFF
    Gear Position
    Gear position information
    FAIL
    1st
    2nd
    3rd
    4th
    5th
    6th
    7th
    8th
    P,N
    R
    NOT R
    Shift Lever Position
    Shift lever position
    FAIL
    P,N
    R
    D/M
    6th/B
    5th
    4th
    3rd
    2nd
    1st
    Operated System
    System status
    ABS activated: ABS
    VSC activated: VSC
    TRAC activated: TRC
    BA activated: BA
    Fail safe mode activated: FAIL
    No system activated: NON
    System prohibited: SYS
    Master Cylinder Sensor
    Master cylinder pressure sensor reading
    Brake pedal release : 0.3 to 0.9 V
    Brake pedal depress: 0.8 to 4.5 V
    M/C Sensor Grade
    Master cylinder pressure sensor change
    Min.: -30 MPa/s
    Max.: 225 MPa/s
    Yaw Rate Sensor
    Yaw rate angle sensor reading
    Min.: -128 deg/s, Max.: 127 deg/s
    Lateral G
    Lateral G
    Min.: -25.11 m/s2, Max.: 24.91 m/s2
    Forward and Rearward G
    Forward and backward G
    Min.: -25.11 m/s2, Max.: 24.91 m/s2
    FR Wheel Speed
    FR wheel speed
    Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)
    FL Wheel Speed
    FL wheel speed
    Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)
    RR Wheel Speed
    RR wheel speed
    Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)
    RL Wheel Speed
    RL wheel speed
    Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)
    Vehicle Speed
    Wheel speed sensor reading
    Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph)
    Vehicle Speed Grade
    Vehicle speed grade
    Min.: -25.11 m/s2, Max.: 24.91 m/s2
    Real Engine Torque
    Real engine torque
    Min.: -1.024 Nm, Max.: 1.023 Nm
    Accelerator Opening Angle %
    Accelerator opening angle %
    Min.: 0 %, Max.: 128 %
    Inspection Mode
    Inspection mode
    OTHER: Normal, INSPECT: Service
    Steering Angle Sensor
    Steering angle sensor reading
    Left turn: Increase
    Right turn: Drop
    *: 2WD