BRAKE ACTUATOR (w/o VSC) > REMOVAL |
| 1. DRAIN BRAKE FLUID |
| 2. DISCONNECT BATTERY NEGATIVE TERMINAL |
| 3. REMOVE AIR CLEANER ASSEMBLY WITH HOSE |
| 4. REMOVE BRAKE ACTUATOR WITH BRACKET |
Release the latch of the brake actuator connector to disconnect the connector
![]() |
Using SST, disconnect the 6 brake tubes from the actuator with bracket.
![]() |
Use tags or make a memo to identify the places to reconnect.
![]() |
Remove the 3 bolts and the actuator with bracket.
| 5. REMOVE BRAKE ACTUATOR |
Remove the 2 nuts and the brake actuator assembly from the brake actuator bracket.