Home › BODY › MIRROR › INNER REAR VIEW MIRROR

INNER REAR VIEW MIRROR > INSPECTION

for Preparation Click here



1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY


    B150417E02
  1. Inspect operation of the electrochromic inner mirror.

    1. Connect the positive (+) lead from the battery to terminal 1 and connect the negative (-) lead to terminal 2.

    2. Attach black colored tape to the forward sensor to prevent it from sensing.

    3. Light up the mirror with an electric light and check that the mirror surface changes from bright to dark.

      Standard:
      Mirror surface changes from bright to dark

      If the result is not as specified, replace the mirror assembly.