Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE STEERING COLUMN COVER


    F044998
  1. Remove the 2 screws and steering column cover.



2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
  1. Disconnect the connector.



    I035788E01
  1. Using a screwdriver, disengage the claw and pull out the windshield wiper switch assembly.

    NOTICE:
    The claw will be broken if pressed hard.

    HINT:
    Tape up the screwdriver tip before use.