Home › BODY ELECTRICAL › WIPER AND WASHER › FRONT WIPER RUBBER

FRONT WIPER RUBBER > INSTALLATION

for Preparation Click here



1. INSTALL FRONT WIPER RUBBER


    E059361E10
  1. Install the wiper rubber backing plates to the front wiper rubber.

    NOTICE:
    Be careful about the right side and the wrong side of the backing plates.



    E057398E04
  1. Install the front wiper rubber so that the head part (Larger side) of the wiper rubber faces the arm axle side.

    NOTICE:
    Push the front wiper blade into the grooves of the wiper rubber to engage them completely.