Home › BODY › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type RH Side)

REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type RH Side) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE REAR NO. 2 SEAT LEG SIDE GARNISH SUB-ASSEMBLY


    B126835
  1. Disengage the 9 clips and remove the rear No. 2 seat leg side garnish sub-assembly.

  1. Remove the 9 clips from the rear No. 2 seat leg side garnish sub-assembly.



3. REMOVE REAR SEAT LEG SIDE GARNISH SUB-ASSEMBLY


    B126864
  1. Disengage the 4 clips and remove the rear seat leg side garnish sub-assembly.

  1. Remove the 4 clips from the rear seat leg side garnish sub-assembly.



4. REMOVE NO. 2 SEAT HINGE COVER


    B126865
  1. Disengage the 4 claws and remove the No. 2 seat hinge cover.



5. REMOVE REAR NO. 2 SEAT ASSEMBLY


    B126866
  1. Disconnect the connector.

  1. Remove the 6 bolts.



    B126867
  1. Pull the lever under the No. 2 seat cushion sub-assembly and remove the rear No. 2 seat assembly.