REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type RH Side) > DISASSEMBLY |
| 1. REMOVE REAR NO. 2 SEAT COVER BEZEL |
![]() |
Remove the 3 screws.
Disengage the 3 claws and remove the rear No. 2 seat cover bezel.
| 2. REMOVE REAR SEAT RECLINING COVER RH |
![]() |
Remove the 2 screws.
Disengage the claw and remove the rear seat reclining cover RH.
| 3. REMOVE REAR SEAT RECLINING COVER LH |
![]() |
Remove the 2 screws.
Disengage the claw and remove the rear seat reclining cover LH.
| 4. REMOVE REAR SEAT HEADREST ASSEMBLY |
| 5. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY LH |
![]() |
Remove the pad.
![]() |
Remove the 2 clips.
![]() |
Remove the 16 hog rings and disconnect the No. 2 seatback cover sub-assembly with pad.
Turn back the No. 2 seatback cover sub-assembly.
![]() |
Disengage the 2 claws and remove the rear No. 2 seat headrest support assembly LH.
| 6. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY RH |
| 7. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY WITH PAD |
![]() |
Disconnect the connectors.
Disengage the 3 clamps and remove the No. 2 seatback cover sub-assembly with pad.
| 8. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY |
![]() |
Remove the 6 hog rings and No. 2 seatback cover sub-assembly.
| 9. REMOVE NO. 2 SEATBACK PAD |
| 10. REMOVE FOLD SEAT CONTROL ECU |
![]() |
Remove the 2 nuts and fold seat control ECU.
| 11. REMOVE NO. 2 SEATBACK FRAME SUB-ASSEMBLY |
![]() |
Remove the 4 bolts and No. 2 seatback frame sub-assembly.
| 12. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL |
![]() |
Disengage the 4 claws and remove the reclining remote control lever bezel.
| 13. REMOVE REAR POWER SEAT SWITCH |
![]() |
Remove the 2 screws.
Disconnect the connector and remove the rear power seat switch.
| 14. REMOVE REAR NO. 2 SEAT BELT ASSEMBLY INNER |
![]() |
Remove the bolt, washer and rear No. 2 seat belt assembly inner.
| 15. REMOVE REAR SEAT COVER |
![]() |
Remove the 2 screws.
Disengage the 2 claws and remove the rear seat cover.
| 16. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD |
![]() |
Raise the 4 rear seat cushion edge protectors.
Disengage the hooks and remove the No. 2 seat cushion cover sub-assembly with pad.
| 17. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY |
![]() |
Remove the 6 hog rings and No. 2 seat cushion cover sub-assembly.
| 18. REMOVE NO. 2 SEAT CUSHION PAD |
| 19. REMOVE REAR SEAT WIRE |
![]() |
Disconnect the connector.
Disengage the 3 clamps and remove the rear seat wire.
| 20. REMOVE NO. 2 SEAT CUSHION STOPPER |
![]() |
Remove the 2 bolts and No. 2 seat cushion stopper.
| 21. REMOVE NO. 2 SEAT CUSHION SPRING ASSEMBLY |
![]() |
Remove the No. 2 seat cushion spring assembly.
| 22. REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY |
| 23. REMOVE NO. 2 SEAT LEG SUB-ASSEMBLY |
![]() |
Disengage the 3 clamps.
Remove the 3 bolts, nut and No. 2 seat leg sub-assembly.