REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE REAR NO. 2 SEAT LEG SIDE GARNISH SUB-ASSEMBLY |
![]() |
Disengage the 9 clips and remove the rear No. 2 seat leg side garnish sub-assembly.
Remove the 9 clips from the rear No. 2 seat leg side garnish sub-assembly.
| 3. REMOVE REAR SEAT LEG SIDE GARNISH SUB-ASSEMBLY |
![]() |
Disengage the 4 clips and remove the rear seat leg side garnish sub-assembly.
Remove the 4 clips from the rear seat leg side garnish sub-assembly.
| 4. REMOVE NO. 2 SEAT HINGE COVER |
![]() |
Disengage the 8 claws and remove both No. 2 seat hinge covers.
| 5. REMOVE REAR NO. 2 SEAT ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 8 bolts.
![]() |
Pull the lever under the No. 2 seat cushion sub-assembly and remove the rear No. 2 seat assembly.