Home › BRAKE › PARKING BRAKE › PARKING BRAKE PEDAL

PARKING BRAKE PEDAL > DISASSEMBLY

for Preparation Click here



1. REMOVE PARKING BRAKE PEDAL BRACKET PROTECTOR


    F045029
  1. Using a flat-head screwdriver, disengage the 2 claws on the parking brake pedal bracket protector.



    F045030
  1. Turning the parking brake pedal bracket protector clockwise, remove the parking brake pedal bracket protector from the parking brake control pedal.



2. REMOVE PARKING BRAKE CABLE ASSEMBLY NO.1


    F045026
  1. Remove the lock nut, adjusting nut, clip and disconnect the parking brake cable assembly No. 1 from the parking brake control pedal assembly.

  1. Take up the floor carpet.

  1. Remove the 6 bolts and disconnect the parking brake cable assembly No. 1 from the floor. (Except 7 Passenger Type)

  1. Remove the 7 bolts and disconnect the parking brake cable assembly No. 1 from the floor. (7 Passenger Type)



  1. Disconnect the parking brake cable No. 1 from the parking brake equalizer, and remove the parking brake cable No. 1.


    F045027E01



3. REMOVE PARKING BRAKE SWITCH ASSEMBLY
  1. Remove the screw and parking brake switch.