Home › BRAKE › PARKING BRAKE › PARKING BRAKE PEDAL

PARKING BRAKE PEDAL > REASSEMBLY

for Preparation Click here



1. INSTALL PARKING BRAKE SWITCH ASSEMBLY
  1. Install the parking brake switch to the parking brake pedal with the screw.



2. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.1
  1. Connect the parking brake cable No. 1 to the parking brake cable equalizer.

  1. Install the parking brake cable No. 1 with the 6 bolts. (Except 7 Passenger Type)



  1. Install the parking brake cable No. 1 with the 7 bolts. (7 Passenger Type)


    F045027E02

    Torque:
    Bolt (A):
    5.6 N*m{ 57 kgf*cm , 50 in.*lbf }
    Bolt (B):
    8 N*m{ 82 kgf*cm , 71 in.*lbf }



3. INSTALL PARKING BRAKE PEDAL BRACKET PROTECTOR


    F045031
  1. Fit the convex part on a new parking brake pedal bracket protector into the concave part on the parking brake control pedal and turn the parking brake pedal bracket protector counterclockwise.



    F045032
  1. Engaging the 2 claws, install the parking brake pedal bracket to the parking brake control pedal.