PARKING BRAKE ASSEMBLY > DISASSEMBLY |
| 1. REMOVE REAR WHEEL |
| 2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY LH |
| 3. REMOVE REAR DISC |
Release the parking brake, and remove the rear disc.
| 4. REMOVE PARKING BRAKE SHOE ASSEMBLY LH NO.1 |
![]() |
Using needle-nose pliers, remove the 2 shoe return tension springs.
![]() |
Disconnect the tension spring from the parking brake shoe assembly LH No. 1.
Slide out the parking brake shoe assembly LH No. 1 and remove the parking brake shoe assembly LH No. 1.
Remove the shoe hold-down compression spring, 2 cups and shoe hold-down compression spring pin No. 1.
| 5. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET |
| 6. REMOVE PARKING BRAKE SHOE STRUT LH |
| 7. REMOVE PARKING BRAKE SHOE ASSEMBLY LH NO.2 |
![]() |
Disconnect the return spring from the parking brake shoe assembly LH No. 2 and remove the tension spring.
Slide out the parking brake shoe assembly LH No. 2.
Remove the shoe hold-down compression spring, 2 cups and shoe hold-down compression spring pin No. 2.
Using needle-nose pliers, disconnect the parking brake cable No. 3 from the parking brake shoe lever and remove the parking brake shoe assembly LH No. 2.
| 8. REMOVE PARKING BRAKE SHOE LEVER LH |
![]() |
Using a screwdriver, remove the C-washer.
Remove the shim and shoe lever from the parking brake shoe.