BRAKE PEDAL > DISASSEMBLY |
| 1. REMOVE STOP LIGHT SWITCH ASSEMBLY |
Turn the stop light switch assembly counterclockwise and remove the stop light switch assembly.
Remove the stop light switch mounting adjuster from the brake pedal support sub-assembly.
| 2. REMOVE STOP LIGHT SWITCH CUSHION |
Remove the stop light switch cushion from the brake pedal sub-assembly.
| 3. REMOVE BRAKE PEDAL |
Remove the 2 brake pedal shafts, 2 nuts and brake pedal from the brake pedal support sub-assembly.
| 4. REMOVE BRAKE PEDAL BUSH |
Remove the 4 brake pedal bushes from the brake pedal.
| 5. REMOVE BRAKE PEDAL SHAFT COLLAR |
Remove the 2 brake pedal shaft collars from the brake pedal.
| 6. REMOVE PUSH ROD PIN |
![]() |
Using a screwdriver, remove the 2 E-rings, 2 push rod pins and 2 plates from the brake pedal.
Remove the 2 push rod bushes.
| 7. REMOVE BRAKE PEDAL PAD |
Remove the brake pedal pad to the brake pedal sub-assembly.