FRONT BRAKE > REMOVAL |
| 1. REMOVE FRONT WHEEL |
| 2. DRAIN BRAKE FLUID |
| 3. REMOVE FRONT DISC BRAKE CYLINDER SUB-ASSEMBLY |
Remove the union bolt and 2 gaskets from the front disc brake cylinder sub-assembly, then disconnect the flexible hose.
![]() |
Hold the front disc brake cylinder slide pin and remove the 2 bolts.
| 4. REMOVE DISC BRAKE PAD KIT FRONT (PAD ONLY) |
Remove the disc brake pad kit front from the front disc brake cylinder mounting LH.
| 5. REMOVE ANTI SQUEAL SHIM KIT FRONT |
Remove the anti squeal shim and pad wear indicator plate from the each pad.
| 6. REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE |
Remove the front disc brake pad support plate (No. 1) and front disc brake pad support plate (No. 2) from the front disc brake cylinder mounting LH.
| 7. REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN |
![]() |
Remove the front disc brake cylinder slide pin (No. 1) and front disc brake cylinder slide pin (No. 2) from the front disc brake cylinder mounting LH.
| 8. REMOVE FRONT DISC BRAKE CYLINDER SLIDE BUSH |
![]() |
Using a screwdriver, remove the front disc brake cylinder slide bush from the front disc brake cylinder slide pin (No. 2).
| 9. REMOVE FRONT DISC BRAKE CYLINDER MOUNTING LH |
![]() |
Remove the 2 bolts and front disc brake cylinder mounting LH.