SHIFT LEVER > REMOVAL |
| 1. DISCONNECT BATTERY NEGATIVE TERMINAL |
| 2. REMOVE FRONT DOOR SCUFF PLATE LH |
| 3. REMOVE FRONT DOOR SCUFF PLATE RH |
| 4. REMOVE COWL SIDE TRIM BOARD LH |
| 5. REMOVE COWL SIDE TRIM BOARD RH |
| 6. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER LH |
| 7. REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY |
| 8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY |
| 9. REMOVE FLOOR CARPET COVER CENTER LH |
| 10. REMOVE FLOOR CARPET COVER CENTER RH |
| 11. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER NO.1 |
| 12. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER NO.2 |
| 13. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Remove the floor shift lever knob sub-assembly.
| 14. REMOVE POSITION INDICATOR HOUSING ASSEMBLY |
![]() |
Using a screwdriver, remove the position indicator housing assembly from the instrument cluster finish panel assembly center.
| 15. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER |
| 16. REMOVE SHIFT LEVER CAP |
![]() |
Using a small screwdriver, remove the shift lever cap from the position indicator housing assembly.
| 17. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER |
| 18. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() |
Using a screwdriver, disconnect the cable end from the shift lever assembly.
Using a small screwdriver, disconnect the outer of transmission control cable assembly from the shift lever assembly.
| 19. REMOVE SHIFT LEVER ASSEMBLY |
![]() |
Disconnect the 2 connectors.
Remove the 4 bolts and disconnect the shift lever assembly from the vehicle.