Home › BRAKE › BRAKE CONTROL › FRONT SPEED SENSOR

FRONT SPEED SENSOR > INSPECTION

for Preparation Click here



1. INSPECT FRONT SPEED SENSOR
  1. Make sure that there is no looseness at the connector lock part and connecting part of the connector.

  1. Disconnect the speed sensor connector.



    C093876E13
  1. Measure the resistance between terminals 1 and 2 of the speed sensor connector.

    OK:
    Resistance:
    0.92 to 1.22 kΩ

  1. Measure the resistance between terminals 1 and 2 of the speed sensor connector and body ground.

    OK:
    Resistance:
    1MΩ or higher