Home › BODY › ENGINE HOOD / DOOR › SLIDE DOOR CLOSER SYSTEM

SLIDE DOOR CLOSER SYSTEM > INITIALIZATION

for Preparation Click here



RESET
  1. Reset the power slide door system:
    The power slide door ECU records the fully open position of the power slide door in its memory and the power slide door fully opens and closes based on this memory. The power slide door cannot operate without this memory. In the case where the battery has been removed, manually close the slide door fully to reset the power slide door system. However, if the battery is removed / installed when the slide door is fully open, the power slide door operates normally, thus the resetting the system is unnecessary.