Home › BODY › ENGINE HOOD / DOOR › POWER SLIDE DOOR SYSTEM

POWER SLIDE DOOR SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC (USING TECHSTREAM)
  1. Checking DTCs.

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch ON.

    3. Read DTCs by following the prompts on the tester screen.

      HINT:
      Refer to the Techstream operator's manual for further details.


CLEAR DTC (USING TECHSTREAM)
  1. Clearing DTCs from memory.

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch ON.

    3. Erase the DTCs following the prompts on the tester screen.

      HINT:
      Refer to the Techstream operator's manual for further details.