Home › BODY › ENGINE HOOD / DOOR › POWER SLIDE DOOR SYSTEM

POWER SLIDE DOOR SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here


HINT:
The following items can be customized.

NOTICE:
  1. After confirming whether the items requested by the customer are applicable or not for customization, perform the customize operation.
  2. Be sure to record the current settings before customizing.
  3. When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization.


Power slide door ECU LH/RH: 
DISPLAY (ITEM)
DEFAULT
CONTENTS
SETTING
PSD SW Operation
0.0s
Function that turns satellite switch ON when switch is pressed for specified time
0.8s/0.0s*1
PSD Buzzer Volume
OFF
Function that adjusts volume of warning buzzer that notifies power slide door is operating
LARGE / SMALL / OFF
Wireless PSD Operation
0.8s
Function that operates power slide door when transmitter switch is pressed in specified way (1-press, 2-presses, 0.8 sec.-press or OFF*2)
1 OPER / 2 OPER / 0.8s / OFF*2
*1 "0.0s" appearing on the display of the Techstream means that a 1-press of the satellite switch operates the power slide door.
*2 Wireless (transmitter switch) operation of the power slide door is disabled.